Overview
This process is necessary if the small set of admin keys have been lost. As these are all keyed differently we will need to replace the admin lock completely and not just the keys.
Tools Required
- Small flat head screwdriver
- 1/2 Inch Drive, 15mm socket
- Vice grips
Procedure
- Find the admin lock Open the control door and locate the admin lock and its terminal connection.
- Disconnect the wires Unscrew the two wires held in the terminal block, leaving them exposed.
- Fit the socket Use a ½ inch drive, 15mm socket (it must be ½ inch, or it won’t reach the lock-nut). Long-nose vice grips also work.
- Loosen the locking-nut Using vice grips or pliers.
- Unscrew it by hand Once it’s loosened, it’s easier to continue by hand.
- Thread the nut over the wires Once it’s free.
- Remove the admin lock Pull it out of the control door.
You are now complete, to fit the replacement admin lock you just perform these steps in reverse.