Overview
Our retention kits and cables are a great way to ensure no charging hardware can be removed from your FUYL Pro Smart Locker Systems.
When using the Universal (A & C) retention kits with our new USB-C cables, there may be a small amount of freedom for the cables to disconnect from the power source without being allowed to be removed entirely.
To resolve this, we have designed and will produce a new retention kit (including cables) and provide inserts for existing customers affected by this issue.
Resolution
3D printed inserts are available in both physical (contact support) and digital form.
Installation
-
Prepare each component You’ll need official USB-C cables for the correct fit, the Universal (A/C) Retention Kit and an insert.
-
Fit the insert on the cable On the USB-C cable’s straight end. Note the orientation of the insert.
-
Put the cable in the retention clip For the most strength, line up the opening on the insert with the solid side of the clip. It fits either way.
-
Reinstall the retention clip