Overview
FUYL MK3 and MK4 lockers charge devices through USB-C Power Delivery (PD) ports rated up to 36W. Most phones, tablets, Chromebooks and many laptops charge from these ports without any issue, but some laptops won't charge from them at all. This article explains why that happens, how to check a device, and what to do if it won't charge.
Why some devices won't charge
When a device is plugged into a USB-C PD port, the device and the port negotiate how much power to use. The port offers the power levels it supports, and the device decides whether to accept one of them. FUYL USB-C ports offer:
- 5V @ 3A (15W)
- 9V @ 3A (27W)
- 12V @ 3A (36W)
- 15V @ 2.4A (36W)
- 20V @ 1.8A (36W)
Some laptops are designed to refuse any charger below a minimum wattage, or any charger that isn't made or certified by the laptop's manufacturer, even when that charger is working correctly. When this happens the port is working as intended. The device has simply declined the power on offer.
This behaviour isn't consistent between manufacturers, or even between models and generations from the same manufacturer. For example, we've seen some generations of HP ProBook and HP Spectre/x360 laptops refuse to charge at 36W, while HP EliteBooks charge without issue. It's a long-standing USB-C quirk rather than something specific to FUYL. PCWorld's USB-C charging test shows the same thing across a range of laptops and chargers.
Signs a device isn't accepting the charge
- The device's charging light flashes briefly when it's plugged in, then turns off.
- The device doesn't show that it's plugged in at all, and the battery keeps draining.
- The device shows a "slow charger" or "low-power charger" warning. In this case it is charging, but it may charge slowly, or not at all while it's being used heavily.
- The device stops at startup to warn about a low-wattage charger and waits for a key press (some Dell laptops do this by default, but it can be turned off individually or via an MDM). Power management hasn't loaded at this point, so the device can draw more than the port supplies and drain while plugged in, such as after restarting for updates in the locker.
Check a device
We recommend testing each model of device in your fleet before deploying it to a locker.
- Shut the device down Completely, not sleep or hibernate.
- Plug it in Connect it to a FUYL USB-C port and note what the charging light does.
- Start the device While it's still plugged in, and note any messages about the charger or power adapter.
- Check the BIOS/UEFI Look for power or USB-C charging settings. Some models have options that block charging from third-party chargers.
- Update the firmware Update the device's BIOS and power management firmware using the manufacturer's support tools. Firmware updates sometimes improve compatibility with third-party chargers.
If a device still won't charge
Use the device's own charger, plugged into the power outlet (GPO) in the bay. Please note that Unplugged Device Detection relies on the USB-C PD connection, so it can't detect devices charging from the GPO. If it's turned on, these devices are flagged as unplugged when they're returned and marked as unavailable for loaning, so turn it off where these devices are used. See Device Loaning Administration for details.
Older FUYL Lockers (MK1, MK2 & MK2.5)
Older FUYL Lockers charge through USB-A ports limited to 5V 2.4A, which isn't enough to charge most laptops. Use the device's own charger in the bay's GPO instead.
Still having trouble?
Please contact our support team with the device's make, model and generation, its BIOS version, which locker it's charging in, and what the charging light does when it's plugged in.