Overview
Each 12V lock cable connects two lock modules in a FUYL Tower (MK2). This article covers replacing one.
Procedure
- Power down the locker Unplug it and wait 30 seconds for any power to dissipate.
- Open the Maintenance Access Panel Wear an anti-static strap first, as lock modules are easily damaged by electrostatic discharge.
- Unplug the old cable Release the clip at each end to disconnect it from both lock modules.
The cable plugs into a connector on each lock module. - Plug in the new cable Connect it to both lock modules, tucked away so the panel won’t chafe it when closed.
- Check and close the panel Make sure the cables are neat, and that the panel opens, closes and locks without catching them.