Overview
This article covers replacing the Raspberry Pi power supply in a FUYL Locker (MK1).
Tools Required
- Torx-Head Screwdriver
- Phillips-Head Screwdriver
- Cable Cutters
- Cable ties
Procedure
- Power down the locker Unplug it and wait 30 seconds for any power to dissipate.
- Remove the side panel Undo the 20 to 25 Torx screws on the side and front panels. The front ones are hidden behind the bay doors.
- Remove the bracket Unscrew the metal bracket holding the power supply with a Phillips screwdriver.
- Cut the cable ties There may be a few holding the power supply cable in place.
- Swap the power supply Remove the power brick and its cable to the Pi, and replace them with the new power supply.
- Secure the new power supply Fit it in the metal bracket and fix it in place, then attach new cable ties where the old ones were.
- Replace the side panel
You have now successfully replaced the Raspberry Pi power supply.